Electronics

What certification is required to export electronic products to Russia? According to the relevant laws of Russia, PCT certification is required for the certification of imported electronic products exported to Russia. This mark is authorized to be used by the national certification agency a of the Russian Standardization Committee for electrical equipment. Therefore, the product should first obtain the COCerticate issued by GOST Re. of Conformity) certificate. For this reason, in addition to meeting the requirements of the Russian national standards in terms of safety, the quality assurance system of the product manufacturer should also meet the relevant requirements of GOST Re. In addition, most household appliances, such as televisions, washing machines, refrigerators, etc., also need to meet the relevant EMC requirements. Hygienic certification is required for products that come into contact with water or food (such as electrical kitchenware, refrigerators), and products that generate X-ray radiation, microwave radiation, or noise or vibration.

Before the electronic products are imported into the Russian market, Russia has to make a unilateral judgment on their safety performance and fire performance! The COC certificates of GOST Re issued for product safety are issued in sequence. However, according to the laws of the Russian Federation, household refrigerators must first pass the Fire Saiety Certification before obtaining the COC certificate of GOST Re; the application for fire safety certification must be submitted to the Russian Federal Emergency Management Agency. At the same time, the COC certificate issued by GOST Re is also required to carry a health permit number. For safety testing, since Russia is a member of CB and is equivalent to adopting IEC standards, CB reports and certificates issued by my country can be fully accepted. Manufacturers with CB certificates can use CB certificates and test reports to obtain GOST R certificates. Because the factory inspection needs to be carried out by GOST Re directly according to the requirements of CENELEC (its procedures and requirements are basically the same as the inspection of general European certification), and EMC is also required to be carried out in a laboratory directly recognized by Russia, in order to save time and cost. , we can directly invite GOST Re-approved engineers to complete EMC test, fire test and factory inspection at the same time. Since there is currently no laboratory directly accredited by Russia in China, the test can be carried out in a monitoring manner in the cooperative laboratories of GOST Re, or additional electromagnetic compatibility, hygiene and fire tests can be carried out in Russia.

The above is a complete introduction to what certification is required to export electronic products to Russia, for potentially hazardous industrial equipment (such as pressure vessels, boilers, furnaces, elevators and cranes), or in chemical or explosive environments (such as oil fields, gas mines, Equipment used in oil refineries or chemical plants), the GGTN certificate is also required to be issued by the Mining and Industrial Safety Supervision Agency of the Russian Federation, which is valid for 3 years. Each piece of imported equipment listed on the GGTN certificate must be accompanied by a technical license, which registers the technical parameters of each piece of equipment.

The compulsory certification of electrical products shall comply with the Russian national standards and the CIS standards recognized by the Russian Federation. However, the voluntary certification of electrical products should meet the requirements of the normative documents for the appropriate certification purpose, that is, the voluntary certification follows the wishes of the applicant (producer, seller) to show that the product complies with the standards, technical specifications and other documents specified by the applicant Require.