Crusher hammer

Hammer handle material and processing process:

42CrMo is used for die forging and heat treatment. Machining meets product requirements.

Production direct selling price:

high-smelting cast iron: 18,000-20,000/ton

High manganese steel, Martensitic steel: 14,000-15,000/ton

The crusher hammer can be customized according to the drawing. If there is no drawing, our factory has professional surveying and mapping personnel to help When you use a hand hammer for customization after surveying and mapping

, you should pay attention to the connection between the hammer head and the hammer handle must be firm. If it is slightly loose, you should immediately tighten it with a wedge or replace the hammer handle. The length of the hammer's handle must be moderate. Experience provides a more suitable The length is when the hammer head is held in the hand, and the length of the forearm is equal to the length of the hand hammer; when a smaller hitting force is required, the hand swing method can be used, and when a stronger hitting force is required, the arm swing method should be used; When swinging, attention should be paid to the movement arc of the hammer head, and the handle of the hammer should not be contaminated by grease.

Material: high manganese steel (or Mazi steel, high chromium cast iron)