Introduction

1. The box board needs to adopt the seam form of pressing seam or birch groove seam.

2. Pine or similar materials should be used for wooden box packaging. If multi-layer plywood is used, the thickness should not be less than 9mm. Do not use fiberboard, bamboo veneer and other similar materials.

3. The box is generally supported by wooden squares.

4. The color of the box board is basically the same, the appearance is smooth, there is no obvious burr and bug eye knot, decay, cracks, bending and other defects do not exceed the standard.

5. Waterproof and moisture-proof requirements should be taken into consideration when packaging, and appropriate anti-rust measures should be taken for important processing surfaces.

6. The zigzag cloth nails shall not reveal the nail head and nail tip, and the steel nails shall not be bent in the middle or nailed to the seam.

7. When packing, the center of gravity should be in the middle and lower, and the protruding and special parts should be removed and packaged and packed tightly, and the box should be clean, dry and free of foreign objects.

8. The box body should have reinforcement measures such as edge protection and corner protection, and a lifting back iron should be provided at the lifting place.

Production