Specification

Maintenance

1、When installing a new shock absorber, you should pay attention to whether the model matches, and at the same time confirm whether the left and right are correct.

2、Check the quality of the new shock absorber, such as whether there is oil leakage on the ap- pearance, and pay special attention that the surface of the piston cannot be bumped.

3、Professional tools must be used during installation, and the shock absorber must not be forc- ibly installed. Pay attention to whether the installation position between the shock absorber and the body and car is correct.

4、During the assembly process, be sure to protect the surface of the piston rod, and avoid using tools to pull the piston rod or knock, touch, or scratch the piston rod, otherwise the shock absorber will leak oil. All nuts should use new parts and be tightened according to the specified parameters of the whole vehicle, so as to ensure that the tightening torque of the link part meets the specified parameters of the whole vehicle.

5、When tightening the nuts of the link parts, the tires should be in a natural state and should comply with the parameters specified by the vehicle.

Production