GHL Series High Speed Mixing Granulator

Working principle
The powder material and the binder are fully mixed into a wet soft material by the bottom mixing slurry in the cylindrical container, and then cut into uniform wet particles by the side-mounted high-speed crushing paddle.
Performance characteristics
◎This machine adopts horizontal cylinder structure with reasonable structure.
◎The drive shaft is inflated and sealed, and can be switched to water when cleaning.
◎Fluidized granulation, the granulation is approximately spherical and has good fluidity.
◎Compared with the traditional process, the adhesive is reduced by 25%, and the drying time is shortened.
◎It only takes 2 minutes for dry mixing and 1-4 minutes for granulation in each batch, and the work efficiency is 4-5 times higher than the traditional process.
◎Complete in the same closed container, dry mixing-wet mixing-granulation, the process is shortened.
◎The whole operation has strict safety protection measures.
◎It can be made into a jacket type according to user requirements.