Automatic feeding system

• 

  Thin sheet multi-channel feeding machine

  The product is 0.2mm thick and made of stainless steel. The customer requires taking 7 pieces at a time. The manufacturing method involves 2 vibrating discs and 7 channels for feeding to the open silo. The materials are taken by the PPU mechanical hand and placed in the precise positioning fixture to assist the customer in grasping
  
  2. Efficiency :200 per minute

  contact us
• 

  Ω spring vibrating disc

  The incoming material of the Ω spring is severely entangled. After being separated by the separator, it is sent to the vibrating disc. In the OK position, it is grabbed and assembled through the direct vibration track of the vibrating disc, and in the NG position, it is returned to the separator through the return line, solving the problem of re-entanglement in the vibrating disc
  
  2. Efficiency :15 per minute

  contact us
• 

  Screw locking machine

  1. The screw vibration disc adopts a material distribution and blowing method, and the screws are locked manually
  
  2. Efficiency :20 per minute

  contact us
• 

  Injection molding is embedded in the feeding system

  1. The iron parts are fed by a vibrating disc and sent into the grasping fixture (equipped with a mold positioner to ensure accuracy). The injection molding machine's mechanical hand takes the material and implants it
  
  2. Efficiency :60 per minute

  contact us
• 

  Recommend the feeding machine

  The bolt push feeding machine has the advantages of low noise and strong stability
  
  2. Efficiency :60 per minute

  contact us