Connectors

PP pump pipe joint ,Applicable to YW series peristaltic pumps, metering pumps, titration pumps, smart pumps and many other micro pumps Pump tube

Filter

Capsule filter medical filter ink filter 10 micron 5 micron filter

Mini peristaltic pump head

Extreme chemical resistance,high precision,easy to operate.Generally used in medicine,laboratory and environmental technology,gas analysis etc areas.

Ink buffer bottle

Good quality 2/3 level buffer ink bottle refill ink bottle for printer machine

Ink buffer bottle

Good quality 2/3 level buffer ink bottle refill ink bottle for printer machine

FKM tube

CHEM FLUOR fluoroplastic tube has excellent chemical and physical properties, and can be used in a wide temperature range. According to the type of polymer, the temperature range can be -240C℃~260. . When many chemical and physical properties are the same, the main difference between them is the applicable temperature, purity and mechanical strength.

CHEM FLUOR hoses are produced with resin that meets FDA standards. It does not contain plasticizers, stabilizers and fillers, so it is pure and pollution-free. Compared with metal and rubber, CHEM FLUOR hose is non-corrosive and non-oxidizing. Compared with other plastics, it is not affected by solvents, acids and fuels. CHEM FLUOR FEP and PFA hoses fully comply with the requirements of USP CLASS VI standards, and are non-toxic, non-hemolytic and non-heating.

PharMed BPT

PharMed BPT,Good general chemical resistance,Excellent acid , alkali and oxidation resistance,Temperature resistant from -51 ℃ -135 ℃

Silicone tube

Heat transfer oil pump accessories

Wuxi Yifang Pump Industry Co., Ltd. specializes in the production of heat transfer oil pumps. After the customer has used it for several years, it is inevitable that there will be a state of natural wear and tear. In this state, it is necessary to replace the parts according to the actual use of the pump. Accessories from large to small are as follows: pump body, pump cover, impeller, pump shaft, bearing housing, coupling and wearing parts. If the customer will not replace it, the pump head (excluding the motor and base), the large assembly (assembled to the impeller), and the small assembly (assembled to the pump shaft) can be assembled to simplify the replacement according to customer requirements.

Heat transfer oil pump fittings coupling

After the customer has used it for several years, it is inevitable that there will be a state of natural wear and tear. In this state, it is necessary to replace the parts according to the actual use of the pump. Accessories from large to small are as follows: pump body, pump cover, impeller, pump shaft, bearing housing, coupling and wearing parts. If the customer will not replace it, the pump head (excluding the motor and base), the large assembly (assembled to the impeller), and the small assembly (assembled to the pump shaft) can be assembled to simplify the replacement according to customer requirements.

Heat transfer oil pump fittings coupling

After the customer has used it for several years, it is inevitable that there will be a state of natural wear and tear. In this state, it is necessary to replace the parts according to the actual use of the pump. Accessories from large to small are as follows: pump body, pump cover, impeller, pump shaft, bearing housing, coupling and wearing parts. If the customer will not replace it, the pump head (excluding the motor and base), the large assembly (assembled to the impeller), and the small assembly (assembled to the pump shaft) can be assembled to simplify the replacement according to customer requirements.

Heat Transfer Oil Pump Accessories 1 - Large Assembly (Assembled to Impeller)

After the customer has used it for several years, it is inevitable that there will be a state of natural wear and tear. In this state, it is necessary to replace the parts according to the actual use of the pump. Accessories from large to small are as follows: pump body, pump cover, impeller, pump shaft, bearing housing, coupling and wearing parts. If the customer will not replace it, the pump head (excluding the motor and base), the large assembly (assembled to the impeller), and the small assembly (assembled to the pump shaft) can be assembled to simplify the replacement according to customer requirements.